feat: Initialize ESP-IDF project with Zigbee HA_on_off_switch example

- Added .devcontainer configuration for development environment.
- Created .gitignore to exclude unnecessary files.
- Configured C/C++ properties for ESP-IDF in VSCode.
- Set up launch configurations for debugging.
- Defined project settings for ESP-IDF in VSCode.
- Created CMakeLists.txt for project build configuration.
- Added README.md with project overview and usage instructions.
- Established dependencies for Zigbee libraries in dependencies.lock.
- Implemented main application logic in esp_zb_switch.c and esp_zb_switch.h.
- Developed switch driver functionality in switch_driver.c and switch_driver.h.
- Configured partition table in partitions.csv for NVS and application storage.
- Set default SDK configuration in sdkconfig.defaults for project settings.

main/switch_driver.h

@@ -0,0 +1,121 @@
+/*
+ * SPDX-FileCopyrightText: 2021-2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: LicenseRef-Included
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form, except as embedded into a Espressif Systems
+ *    integrated circuit in a product or a software update for such product,
+ *    must reproduce the above copyright notice, this list of conditions and
+ *    the following disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software without
+ *    specific prior written permission.
+ *
+ * 4. Any software provided in binary form under this license must not be reverse
+ *    engineered, decompiled, modified and/or disassembled.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#pragma once
+
+#include "driver/gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* user should configure which I/O port as toggle switch input, default is GPIO9 */
+#define GPIO_INPUT_IO_TOGGLE_SWITCH  GPIO_NUM_9
+
+/* GPIO para controlar o relay */
+#define GPIO_OUTPUT_RELAY  GPIO_NUM_8
+
+/* config button level depends on the pull up/down setting
+   push button level is on level = 1 when pull-down enable
+   push button level is on level = 0 when pull-up enable
+*/
+#define GPIO_INPUT_LEVEL_ON     0
+
+#define ESP_INTR_FLAG_DEFAULT 0
+
+#define PAIR_SIZE(TYPE_STR_PAIR) (sizeof(TYPE_STR_PAIR) / sizeof(TYPE_STR_PAIR[0]))
+
+typedef enum {
+    SWITCH_IDLE,
+    SWITCH_PRESS_ARMED,
+    SWITCH_PRESS_DETECTED,
+    SWITCH_PRESSED,
+    SWITCH_RELEASE_DETECTED,
+} switch_state_t;
+
+typedef enum {
+    SWITCH_ON_CONTROL,
+    SWITCH_OFF_CONTROL,
+    SWITCH_ONOFF_TOGGLE_CONTROL,
+    SWITCH_LEVEL_UP_CONTROL,
+    SWITCH_LEVEL_DOWN_CONTROL,
+    SWITCH_LEVEL_CYCLE_CONTROL,
+    SWITCH_COLOR_CONTROL,
+} switch_func_t;
+
+typedef struct {
+    uint32_t pin;
+    switch_func_t func;
+} switch_func_pair_t;
+
+typedef void (*esp_switch_callback_t)(switch_func_pair_t *param);
+
+/**
+ * @brief init function for switch and callback setup
+ *
+ * @param button_func_pair      pointer of the button pair.
+ * @param button_num            number of button pair.
+ * @param cb                    callback pointer.
+ */
+bool switch_driver_init(switch_func_pair_t *button_func_pair, uint8_t button_num, esp_switch_callback_t cb);
+
+/**
+ * @brief Inicializa o GPIO do relay
+ */
+void relay_driver_init(void);
+
+/**
+ * @brief Define o estado do relay
+ *
+ * @param state     true para ligar, false para desligar
+ */
+void relay_set_state(bool state);
+
+/**
+ * @brief Inverte o estado atual do relay
+ */
+void relay_toggle(void);
+
+/**
+ * @brief Obtém o estado atual do relay
+ *
+ * @return true se ligado, false se desligado
+ */
+bool relay_get_state(void);
+
+#ifdef __cplusplus
+} // extern "C"
+#endif